CADCAM IVODENT AFRICA

1L26D

Liquid Strip 2.5G

Glycerine gel to prevent the oxygen-inhibited layer of composites with composite or ceramic restorations.

Indications:

Try-in paste
Preventing an inhibited layer with composites
Protecting the etching pattern of lab-fabricated all-ceramic restorations

Delivery form:

1 x 2,5g Liquid Strip

532505

Ivoclar Vivadent IPS e.max Ceram

All Ceramic Preparation Guide Edition II

The three-dimensional preparation guide from Ivoclar Vivadent visualizes the proper preparation of teeth for all-ceramic restorations. The model furthermore shows the minimum preparation requirements and the indications of IPS Empress and IPS e.max restorations. The model comes with an illustrated booklet which features the preparation recommendations. The booklet is also available separately.

630548

1L26DMF

Ivoclar Vivadent Variolink

Variolink Esthetic DC Refill 1 x 5g

Variolink Esthetic is a light- and dual-curing luting composite for the esthetic and permanent cementation of ceramic and composite resin restorations. This material represents the next generation of the well-established, esthetic cements Variolink II and Variolink Veneer.

Indications:

Variolink Esthetic DC

Permanent cementation of glass-ceramic, lithium disilicate glassceramic and composite restorations (inlays, onlays, partial crowns, crowns, bridges)

Advantages:

Excellent shade stability thanks to the patented and reactive light initiator Ivocerin which is 100% amine-free
Balanced and straightforward Effect shade system
Lifelike fluorescence
Easy, precise excess removal
Flexible, situational consistency – ideal combination of flowability and stability
Impressive radiodiagnostics

Shades:

Light+, Light, Neutral, Warm, Warm+ and White Opaque

Contains:

Variolink Esthetic Syringe DC 1x 5g
Mixing Tips 15x

VAR_SPECIAL_DC

1L26DG

645955

Ivoclar Vivadent Variolink

Variolink Esthetic LC Refill 1 x 2g

Variolink Esthetic is a light- and dual-curing luting composite for the esthetic and permanent cementation of ceramic and composite resin restorations. This material represents the next generation of the well-established, esthetic cements Variolink II and Variolink Veneer.

Indications:

Variolink Esthetic LC

Permanent cementation of glass-ceramic, lithium disilicate glassceramic and composite restorations (inlays, onlays and veneers)
Only for restorations with a low material thickness of <2 mm and sufficient translucency (e.g. IPS e.max HT).

Advantages:

Excellent shade stability thanks to the patented and reactive light initiator Ivocerin which is 100% amine-free
Balanced and straightforward Effect shade system
Lifelike fluorescence
Easy, precise excess removal
Flexible, situational consistency – ideal combination of flowability and stability
Impressive radiodiagnostics

Shades:

Light+, Light, Neutral, Warm, Warm+ and White Opaque

Contains:

Variolink Esthetic Syringe LC 1x 2g
Mixing Tips 15x

VAR_SPECIAL_LC

1L26DP

SAGEMAX NexxZr PLUS MULTI 2.0 W-98

NexxZr+ Multi 2.0 is the successor to the highly esthetic NexxZr+ Multi with an improved formulation. NexxZr+ Multi 2.0 is a dental multilayer zirconium oxide (4Y-TZP cervical, 5Y-TZP incisal) with natural color and translucency gradient and high flexural strength (850 MPa cervical, 650 MPa incisal). These properties enable the fabrication of highly esthetic, monolithic single-tooth and bridge restorations in the anterior and posterior region. The specially adjusted translucency gradient ensures good coverage in the cervical area and increased translucency in the incisal area. The integrated color gradient also ensures the efficient fabrication of natural-looking restorations.
Flexural strength

650 MPa (incisal)
850 MPa (cervical)

Translucency

49 % (incisal)
45 % (cervical)

Processing techniques

Infiltration technique
Staining technique
Cut-back technique

Shapes
W-98
Thicknesses
14 mm, 16 mm, 20 mm
Indications

Single unit restorations (anterior / posterior)
3-unit bridges (anterior / posterior)

Highlights
1. Natural color gradient – Efficient fabrication of natural looking restorations
2. Specially adjusted translucency gradient – Good coverage in the cervical area and
increased translucency in the incisal area
3. High flexural strength - Single-unit restorations up to 3-unit bridges

Click Here To Download The Safety Data Sheet
Click Here For Instructions For Use
Click Here To Download The Flyer For More Information
Watch The Video Below For More Information:

SAGEMAX_NEXXZR_PLUS_MULT

Ivoclar Vivadent Variolink

Variolink Esthetic

Variolink Esthetic is an adhesive luting composite for the permanent cementation of ceramic and composite restorations. Based on its predecessors, Variolink II and Variolink Veneer, Variolink Esthetic combines features of both and is available in light-cure (LC) and dual-cure (DC) versions.

Variolink Esthetic contains the patented light initiator, Ivocerin, which is 100% amine-free for enhanced shade stability.

Variolink Esthetic LC is indicated for use with glass-ceramic, lithium disilicate and composite inlays, onlays, and veneers with a material thickness of less than two millimeters and sufficient translucency for light penetration.

Variolink Esthetic DC is designed for cases in which full light curing cannot be achieved, including opaque ceramic and composite inlays, onlays or partial crowns, and crowns and bridges. Each formulation has five shades available: Light+, Light, Neutral, Warm, and Warm+ and the new shade White Opaque.

Variolink Estethic has launched a NEW shade = WHITE OPAQUE
The new WHITE OPAQUE shade is the whitest (whiter than light+) and the most opaque (masks discoloured underlying tooth structure the best).

Variolink Esthetic LC is supplied in 2 g syringes, while Variolink Esthetic DCcomes in 5g and 9g automix syringes. The Variolink Esthetic system kits contain one syringe each of Warm, Neutral and Light cement and try-in paste, etching gel, Adhese Universal VivaPen, Monobond Plus, Liquid Strip, and accessories. Variolink Esthetic was evaluated by 31 consultants in over 300 uses. This adhesive resin cement system received a 98% clinical rating.

Translucency of the 6 different shades:
White Opaque = 2.5%
Light+ = 5%
Light = 10%
Neutral = 17%
Warm = 12%
Warm+ = 8.5%

VARIOLINK_ESTHETIC

1L26DPMF

SAGEMAX Press Ceramic

High strength LS2.
All translucencies.
PressCeramic are lithium disilicate glass-ceramic ingots for the fabrication of highly esthetic all-ceramic restorations using the traditional press technique.

The high flexural strength (470 MPa, typical mean value) enables a wide range of indications and provides reliability for three-unit bridges up to the second premolar.

Depending on the indication and processing technique, the press ingots are available in 4 different translucency levels (MO, LT, MT, HT) and 2 Opal levels. The excellent flow properties permit even high-strength thin veneers. The lifelike opalescence and translucency provide optimum integration into the adjacent tooth structure and a “chameleon effect”.

Click Here To Download The Safety Data Sheet
Click Here For Instructions For Use
Click Here To Download The Flyer For More Information
Watch The Video Below For More Information:

SAGEMAX_PRESS_CERAMIC

1L26DC

1L26DCMF

Sagemax Paint 3D Universal coloring system.
3D effect pastes.

Paint 3D is a universal coloring system for the individual staining and glazing of dental ceramics in the CTE range from 9.4 to 17.5 x 10 –6/K. Ideally suited for milling, pressing and veneering ceramics – including zirconium oxide, lithium disilicate and other glass ceramics – Paint 3D offers a wide range of applications and maximum flexibility in everyday laboratory work.

The innovative 3D effect pastes open up new creative possibilities and give surfaces an impressive three-dimensional depth and texture. Whether for subtle accents or striking effects: These pastes make it possible to transform even the smallest details into realistic dental works of art.

Thanks to their special consistency, the pastes can be applied and modeled effortlessly, making them ideal for demanding projects where precision and efficiency are paramount. Paint 3D supports time-saving workflows without compromising on esthetics or attention to detail – for professional results at the highest level.

SAG767479

Ivoclar Vivadent Variolink

Variolink N

Truly Esthetic

Variolink N is a dual-cure and light-cure luting composite for glass-ceramic, lithium disilicate glass-ceramic and composite resin restorations. The esthetic luting resin from the N-Cement Collection is characterized by a high radiopacity and harmonious shade spectrum.

The special amine-reduced cement Varliolink N LC produces optimum results, particularly in anterior teeth. This solely light-cure material enables very thin (< 2 mm) and highly translucent restorations to be seated esthetically. Variolink N LC is available in the following versions: Clear, +1 and +2.

Advantages

Highly esthetic results
Dual-cure and light-cure materials in seven shades
High radiopacity

Indications
Variolink N is suitable for the cementation of indirect restorations made of leucite-reinforced glass-ceramics (IPS Empress), lithium disilicate glass-ceramics (IPS e.max CAD/Press) and composite resins (SR Nexco), for example

Veneers
Inlay/Onlays
Crowns

Shades
Dual-cure and light-cure: Yellow, White, Transparent, Bleach XL
Solely light-cure: Clear, +1, +2

VARIOLINK_GRID

1DTH26D

IPS e.max CAD Crystall Stains Refill

Intensive stains in paste form for the reproduction of natural characteristics. They are optimally coordinated for use with IPS e.max CAD.

IPS_EMAX_CAD_CRYST_S

Sagemax Paint 3D Universal coloring system.
3D effect pastes.

Paint 3D is a universal coloring system for the individual staining and glazing of dental ceramics in the CTE range from 9.4 to 17.5 x 10 –6/K. Ideally suited for milling, pressing and veneering ceramics – including zirconium oxide, lithium disilicate and other glass ceramics – Paint 3D offers a wide range of applications and maximum flexibility in everyday laboratory work.

The innovative 3D effect pastes open up new creative possibilities and give surfaces an impressive three-dimensional depth and texture. Whether for subtle accents or striking effects: These pastes make it possible to transform even the smallest details into realistic dental works of art.

Thanks to their special consistency, the pastes can be applied and modeled effortlessly, making them ideal for demanding projects where precision and efficiency are paramount. Paint 3D supports time-saving workflows without compromising on esthetics or attention to detail – for professional results at the highest level.

SAGEMAX_PAINT_3D

1DTH26DMF

Ivoclar Vivadent e.max CAD Crystallization Shade

IPS e.max® CAD Crystall/Shades
Dentin stains in paste form that are optimally coordinated with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.

IPS_EMAX_CAD_CRYST_SH

Sagemax Paint 3D Universal coloring system.
3D effect pastes.

Paint 3D is a universal coloring system for the individual staining and glazing of dental ceramics in the CTE range from 9.4 to 17.5 x 10 –6/K. Ideally suited for milling, pressing and veneering ceramics – including zirconium oxide, lithium disilicate and other glass ceramics – Paint 3D offers a wide range of applications and maximum flexibility in everyday laboratory work.

The innovative 3D effect pastes open up new creative possibilities and give surfaces an impressive three-dimensional depth and texture. Whether for subtle accents or striking effects: These pastes make it possible to transform even the smallest details into realistic dental works of art.

Thanks to their special consistency, the pastes can be applied and modeled effortlessly, making them ideal for demanding projects where precision and efficiency are paramount. Paint 3D supports time-saving workflows without compromising on esthetics or attention to detail – for professional results at the highest level.

SAG767510

1DTH26DG