| | Ivoclar Vivadent e.max CAD Cerec
Lithium disilicate (LS2) glass-ceramic is ideally suitable for the fabrication of monolithic restorations or veneered restorations in the anterior and posterior region. Due to its natural-looking tooth colouring and excellent light-optical properties, this material produces impressive results.
Years of clinical experience:
The material is used in the dental laboratory in conjunction with either press or CAD/CAM technology. Years of clinical experience confirm the high strength of 500 MPa* for IPS e.max lithium disilicate. The outstanding performance of the material is based on a combination of excellent flexural strength and high fracture toughness adjusted to the given dental requirements. The clinical success of the material attests to its quality. Furthermore, these properties allow you to work according to the requirements of conservative dentistry. Depending on the patient situation, the restorations may be veneered in a highly esthetic manner or, if fabricated as monolithic restorations, they will be stained.
Patients with devitalized teeth:
Even if the preparations demonstrate a dark shade (e.g. as a result of discolouration or titanium abutments), all-ceramic restorations may be used. In this case, it is important for you to inform your laboratory about the die shade, and the dental technicians then selects the IPS e.max lithium disilicate material in the required opacity in order to design the true-to-nature esthetic appearance.
Indications:
- Veneers (≥ 0.3 mm)
- Inlays and onlays
- Occlusal veneers, partial crowns
- Minimally invasive crowns (≥ 1 mm)
- Implant superstructures
- Hybrid abutment solutions
- Three-unit bridges up to the second premolar as the terminal abutment
Advantages:
- Excellent esthetics and high strength (500 MPa*)
- Versatile applications and extensive indication range
- Minimally invasive preparation and adhesive cementation of crowns with a layer thickness of 1 mm
- Clinical long-term success and scientifically documented results
- Natural-looking esthetics irrespective of the preparation shade
- Adhesive, self-adhesive or conventional cementation depending on the indication
| Prices range from R3 522.93 excl VAT
| |
EMAX_CAD_CEREC |
|
|
| | | | | | |
| | |
| | Ivoclar Vivadent IPS Empress CAD
IPS Empress CAD
This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.
A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal.
Processing Options
Once produced, restorations can be:
- polished
- stained (optional) – glazed
Indications
- Crowns
- Inlays, onlays
- Veneers
Your Benefits
- Highly esthetic restorations, efficiently created
- Clinically proven ceramic material with a flexural strength of 185 MPa*
- Optimum shade adjustment to the natural tooth structure due to the chameleon effect
| ** Prices From R2282,09
| |
EMPRESS_CAD_CEREC | |
|
| | | | | | |
| | |
| | Ivoclar Vivadent emax Ceram
IPS e.max Ceram Intensive Margin
IPS e.max Ceram Margin materials can be used in conjunction with the IPS e.max line and are use to design individualized shoulder areas.
| | |
IPS_EMAX_CERAM_MARGI | |
| | | | | | | |
| | |
| | Ivoclar Vivadent emax Press
IPS e.max Press
IPS e.max Press are lithium disilicate glass-ceramic ingots for the press technique.
The innovative IPS e.max Press lithium disilicate glass-ceramic (LS2) offers excellent fit, form and function combined with high strength of 500 MPa. The material is supplied in seven levels of translucency and ingot two sizes. The resulting restorations exhibit lifelike esthetics, regardless of the clinical situation.
IPS e.max Press is used to produce single-tooth restorations, bridges for the anterior and premolar region, inlays, onlay, implant superstructures and custom implant abutments.
A wide selection of ingots are available from which users can choose to suit their preferred processing technique (staining, cut-back or layering technique) and clinical demands. The restorations are characterized or veneered with coordinated staining materials or layering ceramic from the IPS e.max Ceram assortment. Materials intended for full-contour restorations are available in 16 A-D and four Bleach BL shades. The substructure materials for the layering technique are supplied in varing levels of chromatic shades.
Available ingots:
Multi ingots
These polychromatic and polytranslucent ingots provide a natural shade progression from the margin to the incisal edge, and enable technicians to achieve a strong and highly esthetic restoration without needing to cutback and layer.
HT ingots
The high translucency ingots (HT) are ideal for the fabrication of minimally invasive full-contour restorations, such as inlays, onlays and veneers. The restorations can then be characterized with staining materials in the IPS e.max Ceram line.
MT ingots
The medium translucency ingots (MT) are perfect for a variety of indications from thin veneers to 3-unit bridges and are ideal for restorations requiring a higher brightness level than HT and more translucency than LT.
LT ingots
Full-contour partial crowns and crowns are fabricated beautifully with the low translucency ingots (LT). In the anterior region in particular, the esthetic appearance of the restorations is maximized by employing the cut-back technique.
MO ingots
The medium opacity ingots (MO) are used to fabricate substructures for vital or slightly discolored teeth. They create an ideal basis for lifelike restorations completed with the layering technique.
HO ingots
In cases where the prepared tooth structure is discolored or titanium abutments are used, the HO ingots mask the dark background to achieve highly esthetic results.
Impulse Opal ingots
The best option for enamel replacement. Restorations fabricated with these ingots exude exceptionally opalescent properties making them ideal for (thin) veneers with light teeth requiring an opalescent effect.
| | |
IPS_E_MAX_PRESS | | |
| | |
| | | |
| | |
| | Ivoclar Vivadent Ivocolor
IPS Ivocolor Essence Fluid 15ml
IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality
| | |
667696 | | | | | | | | | |
| | |
| | Ivoclar Vivadent Ivocolor
IPS Ivocolor Shade Guide Essence
IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality
| | |
668544 | | | | | | | | | |
| | |
| | Ivoclar Vivadent Ivocolor
IPS Ivocolor Shade Guide Shades
IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality
| | |
668575 | | | | | | | | | |
| | |
| | Ivoclar Vivadent Ivocolor
IPS Ivocolor Starter Kit
IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality.
Kit Includes:
- 1- IPS Ivocolor Essence E01 white 1.8g
- 1- IPS Ivocolor Essence E02 creme 1.8g
- 1- IPS Ivocolor Essence E10 mahogany 1.8g
- 1- IPS Ivocolor Essence E17 anthracite 1.8g'
- 1- IPS Ivocolor Essence E21 basic red 1.8g
- 1- IPS Ivocolor Shade Dentin SD1 3g
- 1- IPS Ivocolor Shade Dentin SD2 3g
- 1- IPS Ivocolor Shade Dentin SD4 3g
- 1- IPS Ivocolor Shade Incisal Sl1 3g
- 1- IPS Ivocolor Shade Incisal Sl3 3g
- 1- IPS Ivocolor Glaze Powder 1.8g
- 1- 1- IPS Ivocolor Glaze Paste 3g
- 1-IPS Ivocolor Shade Guide Essence
- 1-IPS Ivocolor Shade Guide Shade
| | |
667649 | | | | | | | | | |
| | |
| | Ivoclar Vivadent e.max CAD
IPS e.max® CAD is a high-strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside).
The IPS e.max CAD blocks for chairside processing are available in 16 A-D and four modern Bleach BL shades. They are available in two levels of translucency and two sizes. There are also an even more opaque blocks for the fabrication of frameworks (layering technique) in the laboratory.
The IPS e.max CAD blocks with high translucency (HT) are used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers. For partial crowns and crowns, the less translucent (LT) blocks are used. The restorations are directly milled from the blue blocks. During a quick combined crystallization/glaze firing cycle, which supersedes polishing, the restorations acquire their high strength (360 MPa) and the desired esthetic properties (tooth shade, translucency, brightness).
The restorations can be additionally individualized using the Stain materials. Finally, the restorations are seated. As an alternative to being placed using the adhesive cementation technique, crowns may also be cemented self-adhesively or conventionally.
| | |
EMAX_CAD_E4D | |
|
| | | | | | |
| | |
| |
Ivoclar Vivadent Empress CAD
IPS Empress CAD
This is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.
A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to incisal.
Processing Options:
Once produced, restorations can be:
- polished
- stained (optional) – glazed
Indications:
- Crowns
- Inlays, onlays
- Veneers
Your Benefits:
- Highly esthetic restorations, efficiently created
- Clinically proven ceramic material with a flexural strength of 185 MPa*
- Optimum shade adjustment to the natural tooth structure due to the chameleon effect
IPS Empress CAD is associated with more than 20 years of successful clinical performance. It closely reproduces the natural tooth structure due to its distinct chameleon effect and natural
fluorescence. IPS Empress CAD is known for the highest levels of esthetics and can be easily polished to a high gloss. Grind – polish – done.
A special highlight is the innovative polychromatic IPS Empress CAD Multi block. This block is distinguished by a lifelike transition of shade and fluorescence from dentin to inc
| | |
EMPRESS_CAD_E4D | |
|
| | | | | | |
| | |
| | Ivoclar Vivadent emax Ceram
IPS e.max Ceram Dentin
IPS e.max Ceram Dentin A-D shades can be used to replicate life-like dentin material in IPS e.max restorations.
| | |
IPS_E_MAX_CERAM_DENTIN | |
| | | | | | | |
| | |
| | Ivoclar Vivadent e.max Ceram ZirLiner
IPS e.max Ceram ZirLiner
IPS e.max Zirliner is used to provide white zirconium oxide frameworks with a shaded character. Used to provide white zirconium oxide frameworks with a shaded character. They help adjust the framework shade to the basic ingot and/or block shade (Medium Opacity) of IPS e.max Press and IPS e.max CAD.
IPS e.max Ceram ZirLiner Clear
Used for shaded zirconium oxide frameworks, for Bleach shades, as well as to mix with IPS e.max Ceram Intensive ZirLiner
| | |
IPS_EMAX_CERAM_ZIRLNR | | | | | | | | | |
| | |
| |
Ivoclar Vivadent emax CAD Cerec inlab
IPS E.Max CAD CEREC/inLAB Impulse
For the efficient fabrication of full-contour restorations (Monolithic Solutions) with maximum strength and toughness. The Blocks are available in A–D and Bleach shades and can be processed in the CEREC® or inLab® System from Sirona.
They are optimally suitable for the monolithic fabrication of inlays, onlays, veneers, crowns and 3-unit bridges. Should esthetic charcterizations be necessary, they can be achieved with the staining or cut-back technique.
| | |
IPS_EMAX_CAD_CER_INL | | | | | | | | | |
| | |
| | Ivoclar Vivadent IPS emax Ceram
IPS e.max Ceram
IPS e.max Ceram is the highly esthetic layering ceramic for the IPS e.max System. Choose the suitable framework material in accordance with the indication and the required strength: lithium disilicate glass-ceramic (LS2) or zirconium oxide (ZrO2). Your dental technician can veneer all the IPS e.max materials with IPS e.max Ceram.
Thanks to the one common layering ceramic, all the veneered IPS e.max restorations exhibit the same wear properties and surface gloss. They all feature an impressive esthetic appearance.
Indications
- Characterization/veneering of all IPS e.max components
- Layered veneers
- Designing of gingival segments in implant-supported restorations
Advantages
- One layering ceramic for lithium disilicate glass-ceramic (LS2) and zirconium oxide (ZrO2).
- High esthetics and exact shade match
- Uniform clinical behaviour with regard to wear and gloss – independent of the framework
- Nano-fluorapatite for highly esthetic properties
| | |
CERAM_COLLECTION | |
|
| | | | | | |
| | |
| | Ivoclar Vivadent emax Ceram ZirLiner
IPS e.max CERAM GINGIVA
A total of 12 Gingiva ceramic materials for a lifelike gingiva, particularly for the fabrication of implant-retained restorations. Five life-like gingival materials that are used in combination with the four intensive Gingiva and three Essence powders, depending on the desires of the patient. An IPS e.max Ceram ZirLiner Gingiva is available for use in conjunction with zirconium oxide
| | |
605475 | | | | | | | | | |
| | |
| | Ivoclar Vivadent IPS Empress
IPS Ivocolor Shade Incisal
IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality
| | |
IVOCOLOR_SD_INCISAL | | | | | | | | | |
| | |
| | | | |
673378 | | | | | | | | | |
| | |
| | Ivoclar Vivadent e.max CAD Crystallization Shade
IPS e.max® CAD Crystall/Shades
Dentin stains in paste form that are optimally coordinated with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.
| | |
IPS_EMAX_CAD_CRYST_SH | | | | | | |
| | |
| | |
| | Ivoclar Vivadent e.max ZirCAD/ZirLiner
IPS e.max Ceram ZirLiner Build-Up Liquid
The IPS e.max Ceram ZirLiner Build-Up Liquid allround is exclusively used to mix the IPS e.max Ceram ZirLiner powders. The ZirLiner Liquid provides the materials with a creamy and ductile consistency and thus enables easy and efficient application of the ZirLiner. If another consistency is desired, the liquid may also be mixed with the other IPS e.max Ceram Liquids in any mixing ratio.
| | |
597050 | | | | | | | | | |
| | |
| | Ivoclar Vivadent IPS Empress
IPS Ivocolor Shade Dentin
IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality
| | |
IVOCOLOR_SD_DENTIN | | | | | | |
| | |
| | |
| | | | |
673377 | | | | | | | | | |
| | |
| | Ivoclar Vivadent emax CAD Crystallization Stains
IPS e.max® CAD Crystall./Stains
Intensive stains in paste form that are optimally coordinated for use with IPS e.max® CAD. They may be applied both on "blue" or crystallized restorations.
| | |
IPS_EMAX_CAD_CRYSTST | | | | | | | | |
|
| | |
| | Ivoclar Vivadent e.max ZirCAD/ZirLiner
IPS e.max Ceram Intensive Zirliner
Yellow, orange, brown and incisal are used to enhance the in-depth shade effect.
| | |
INTENS_ZIRLINER | | | | | | | | | |
| | |
| | Ivoclar Vivadent IPS Empress
IPS Ivocolor Essence
IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality
| | |
IVOCOLOR_ESSENCE | | | | |
| | | | |
| | |
