Metal-FREE Ceramics

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Impulse Transpa

The Transparent materials are available in three shade graduations. They are used to accurately reproduce transparent areas in full detail, particularly in the incisal third.

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Opal Effect 20g

The Opal Effect materials are available in six shade gradations. Starting with Opal Effect 1, with naturally enhanced opalescence and simultaneous high translucency, the brightness value between Opal Effect 2 and Opal Effect 4 is continuously increased. Opal Effect 5  then demonstrates the typical opal shade. The Opal Effect violet material is used to reduce the brightness value in the incisal area.

IPS e.max ZirCAD for Cerec/inLab

IPS e.max ZirCAD for Cerec/inLab LT C17

IPS e.max ZirCAD LT are pre-shaded, monochromatic zirconium oxide blocks suitable for use in the dental laboratory and the dental practice. They are used to fabricate full-contour crowns and 3-unit bridges. The high strength of 1.200 Mpa* allows low wall thickness (posterior crowns 0.6mm, anterior crowns 0.4mm) and tooth-preserving preparation. After wet processing in the PrograMill One, the restorations are sintered e.g. Programat  CS4. For glazing, the fluorescent IPS e.max CAD Crystall/Glaze Paste Fluo is available. Optionally, the restorations can be characterized using IPS e.max CAD Crystall/Shades and Stains. IPS e.max ZirCAD restorations are cemented with e.g. SpeedCEM Plus.

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Cervical Transpa

With the shaded Cervical Transparent materials, a life-like in-depth effect is achieved in the cervical third.

Ivoclar Vivadent emax CAD Crystal

IPS® Object Fix Flow & IPS® Object Putty

Auxiliary firing pastes with different levels of viscosity to support allceramic restorations (particularly IPS e.max® CAD) during firing and crystallization. The pastes are used to stabilize and secure the restorations on the silicon nitride support pins or directly on the silicon nitride firing tray. The pastes are easy to apply and remove after the firing procedure.

Ivoclar Vivadent IPS Empress

IPS Ivocolor Mix Liquid Allround

IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent and the Zenostar® zirconia materials from Wieland Dental. Now dental technicians only need one assortment to customize and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality

IPS Ivocolor Mixing Liquid Longlife

Produces a higher viscosity and remains applicable for a longer period of time (approx. 1 week).

Ivoclar Vivadent emax Ceram

IPS Impulse Occlusal Dentin

IPS Classic® metal-ceramic exhibits excellent modeling properties and high stability, even after several firing cycles. Years of successful clinical experience have made IPS Classic® the metal ceramic of choice of dental technicians and clinicians alike.

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Power Incisal

IPS e.max Ceram Power materials have been designed with today’s all-ceramic products in mind.  In the past, the goal of layering was to add translucency and depth to opaque frameworks.  Now, with the high strength and highly translucent materials on the market, adding translucent layering ceramic can often lead to a grayish appearance. IPS e.max Ceram Power powders have been formulated for application on translucent structural ceramics such as lithium disilicate and zirconia and help to keep value levels high to meet dentist and patient requirements. The Power materials may also be added to opaque substructures for increased brightness when the situation demands it.