94 Results

IVOdentIVOhealthProduct Infoadditional 1additional 2Item number:ShadesSizeShadeUnit MeasureSIZESCollectionQtyPrice

Ivoclar Vivadent e.max Press

IPS e.max Investment Ring System

The IPS e.max Investment Ring System is used to sprue the contoured restorations. The base has been enlarged so that the IPS Silicone Ring optimally fits onto the base.

597061

Ivoclar Vivadent emax Ceram 

IPS e.max Ceram Power Dentin

IPS e.max Ceram Power materials have been designed with today’s all-ceramic products in mind.  In the past, the goal of layering was to add translucency and depth to opaque frameworks.  Now, with the high strength and highly translucent materials on the market, adding translucent layering ceramic can often lead to a grayish appearance.  IPS e.max Ceram Power powders have been formulated for application on translucent structural ceramics such as lithium disilicate and zirconia and help to keep value levels high to meet dentist and patient requirements.  The Power materials may also be added to opaque substructures for increased brightness when the situation demands it.

CERAM_POWR_DENTIN

Ivoclar Vivadent e.max Press

IPS e.max Investment Ring System

The IPS e.max Investment Ring System is used to sprue the contoured restorations. The base has been enlarged so that the IPS Silicone Ring optimally fits onto the base.

614490

Ivoclar Vivadent emax CAD Crystal

IPS e.max CAD Crystallization Pin XS

The crystallization pins are required for the crystallization of fully anatomical, milled IPS e.max CAD restorations. This firing tray must not be used to fire IPS e.max Ceram.

656105

Ivoclar Vivadent e.max Press 

IPS Investment Ring System Starter Kit

The IPS Investment Ring System 300 g Starter Kit includes all components necessary for pressing on large-span restorations or on several smaller restorations.

It is suitable for pressing on zirconium oxide frameworks (using IPS e.max ZirPress) and metal frameworks (IPS InLine PoM).

614491

Ivoclar Vivadent e.max Press

IPS Multi Wax Pattern Form

Disposable plunger for pressing IPS ceramic ingots.

IPS_MULTIWAX_PATTERN

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Impulse Inter Incisal

Inter Incisal is a special incisal material which is used to increase the brightness value in the incisal third if the brightness value of the incisal area is high and space is limited.

597006

Ivoclar Vivadent e.max Press

IPS Multi Sprue Guide

The IPS Multi Sprue Guide 200g helps to check the correct sprueing of the objects to be pressed on the IPS Multi Investment Ring Base 200g.

637007

Ivoclar Vivadent emax CAD Crystal

IPS Natural Die Material

The light-curing IPS Natural Die Material simulates the shade of the prepared tooth and thus represents the optimum basis for natural shade reproduction of the given oral situation when fabricating all ceramic restorations. IPS Natural Die Material is available in 9 shades. The assortment contains all the shade variations necessary for the fabrication of life-like all ceramic restorations:

  • 1 shade to imitate bleached preparations (ND 1) 
  • 1 shade to imitate secondary dentin that demonstrates an intensive shade (ND 6)
  • 1 shade to imitate severely discolored / devitalized preparations (ND 9).
IPS_NAT_DIE_MATERIAL

Ivoclar Vivadent emax Ceram

IPS emax Ceram Special Incisal Grey

The Special Incisal materials are used to intensify the incisal area. They may be applied either directly or as an intermediate layer between dentin and incisal.

597005

Ivoclar Vivadent e.max Press

IPS Multi Muffel system

The IPS Multi Muffelsystem is a 200g system for pressing ceramic ingots.

638606

Ivoclar Vivadent emax CAD Crystal

Ivoclar Modeling Brushes Assortment

These high quality sable modeling brushes are made from pure Kolinsky Sable hair. Pure, sable hair brushes exhibit a super fine tip along with great body and moisture retention which allows for precise porcelain placement.

Includes:

  • No. 10 Large Round (530388)
  • No. 6 Medium Round (530387)
  • No. G4 Medium Flat (530390)
  • No. 4 Small Round (530386)
  • No. G2 Small Flat (530389)
  • No. 2 Small Round (530385)
  • No. 1 Small Round (530384)
  • No. 0 Small Round (530383)
IVO_BRUSH_SIZE

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Impulse Special Incisal

The Special Incisal materials are used to intensify the incisal area. They may be applied either directly or as an intermediate layer between dentin and incisal.

597004

Ivoclar Vivadent e.max Press

IPS e.max Press Invex Liquid

The IPS e.max Press Invex liquid is used to soften the surface reaction layer formed on pressed IPS e.max Press and ZirPress objects during the pressing procedure.

597064

Ivoclar Vivadent emax CAD Crystal

The DIE material shade guide enables optimum selection of the die shade after preparation.
To prevent cross-contamination in the oral cavity, the individual tabs and the entire shade guide are autoclavable.

597090

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Gingiva

A total of 12 Gingiva ceramic materials for a life-like gingiva, particularly for the fabrication of implant retained restorations. These five life-like materials are used in combination with the 4 Intensive Gingiva and 3 Essence powders, depending on the desires of the patient. An IPS e.max Ceram ZirLiner Gingiva is available for use in conjunction with zirconium oxide.

CERAM_ESSENCE

Ivoclar Vivadent e.max Press

IPS Multi One Way Plunger

The IPS Multi One Way Plunger is a disposable plunger for pressing IPS ceramic ingots.

637042

Ivoclar Vivadent e.max Press

IPS Investment Ring Tongs

The Investment Ring Tongs have been designed to ensure safe working procedures. The tongs are used to place the pressed ceramic ingots and Alox plunger in the investment ring prior to pressing.

554073

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Gingiva

A total of 12 Gingiva ceramic materials for a life-like gingiva, particularly for the fabrication of implant retained restorations. These five life-like materials are used in combination with the 4 Intensive Gingiva and 3 Essence powders, depending on the desires of the patient. An IPS e.max Ceram ZirLiner Gingiva is available for use in conjunction with zirconium oxide.

CERAM_GINGIVA

Ivoclar Vivadent: Programat Accessories

IPS Ingot Tongs

The IPS Ingot Tongs are used to simultaneously place several press ingots in the 300-g investment ring.

614498

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Intensive Gingiva

A total of 12 Gingiva ceramic materials for a life-like gingiva, particularly for the fabrication of implant retained restorations. Five life-like gingival materials are used in combination with these 4 Intensive Gingiva powders and 3 Essence powders, depending on the desires of the patient. An IPS e.max Ceram ZirLiner Gingiva is available for use in conjunction with zirconium oxide.

INTENSIVE_GINGIVA

Ivoclar Vivadent IPS e.max Press

IPS e.max One Way Plungers
IPS One-Way-Plunger 300g (28mm) 50 Stk.

The 300g one way plunger is for use with the 300g IPS Investment Ring System.

614562

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Build-Up Liquid

With the allround liquid, a consistency suitable for conventional processing and drying is achieved. Powders mixed with the soft liquid demonstrate a shorter processing time.

The patented metal-ceramic material, IPS Style offers dental labs maximum efficiency, easy handling and life-like esthetics. This is the first material in the history of dental ceramics to contain oxyapatite crystals. These crystals reflect a high amount of incident lighting and provide restorations with a natural-looking depth.

673375

Ivoclar Vivadent emax Ceram

IPS e.max Ceram Incisal

IPS e.max Ceram Incisal and Transparent Incisal demonstrate slight fluorescence and opalescence similar to natural enamel. The high stability and excellent modeling properties enable quick and accurately detailed layering of true to nature incisal edges and occlusal surfaces.

602460
To top