Finishing and Polishing IVODENT AFRICA

IVOdent	IVOhealth	Product Info	additional 1	additional 2	Item number:	Qty	Price
		What Is Diashine? DiaShine Polishing Compound is a premier polishing paste for every dental restorative material (ceramics, composites, provisionals and metals). The combination of our unique carrier (binder) with our specific sized & shaped diamond particles make polishing less wasteful and creates a very quick high lustre finish. DiaShine, comprised of food grade materials, is completely water soluble and versatile using the paste/brush technique allowing the user to easily reach the entire anatomy. Used as recommended, DiaShine does not remove the restorative material therefore keeping the morphology and integrity of the restoration intact. By polishing with DiaShine, a much smoother surface is achieved which may enhance bio-compatibility with gingiva, reduce wear of the opposing dentition and lessen the chance of surface micro fractures. How Do I Get Diashine Onto The Bristle Brush? Part of what makes DiaShine work so well is the unique binder; there is no need to add water or any other substance to the polish. Simply take your bristle brush or felt of choice, run it at a low speed (5k rpm is recommended) and slowly dip the brush into the tub. The friction created will melt the paste onto the brush. When you see the brush changing to the colour of the paste, you have enough. How Does DiaShine Work? Because of the unique composition of the binder/carrier, the compound stays on the rotary applicator and the object being polished. This coupled with the specific size & shape of our diamond powder enables a high gloss finish to be obtained quickly and with minimal effort. What Are The Different Types Of Diashine And What Are They Used For? The Fine grit is the most popular and available in two versions, Fine and Fine Soft. Fine is a very hard compound and is best used with a stiff bristle brush or felt. Fine Soft is a slightly softer version of the Fine and can be used on composites or the newer nano and hybrid ceramics. Medium DiaShine will give you a quick high shine, but not a high lustre – this can also be used to bring a shine back. Coarse is used for obtaining a matte finish or for smoothing (prepping) the surface for final polishing – great for smoothing out occlusal anatomy. Intra Oral is the chairside version of the Fine grit for polishing after adjusting in the mouth. What About The I/O (Intra-Oral) Diashine? Intra Oral is the softest version of DiaShine allowing for easy extrusion from the syringe for polishing chairside. Similar to the laboratory versions, this is also food grade. The Intra Oral has a mild peppermint odour and slightly higher concentration of diamond powder. Intra Oral DiaShine can be used on any type of restorative material such as ceramics, composites, provisionals and metals. How Do I Apply The I/O (Intra-Oral) Diashine? Extrude a small amount of polish directly onto the restoration or rub onto restoration with your finger. Spread the polish over the surface with your brush of choice (See our brushes HERE) at around 5k rpm. After spreading the polish onto the restoration, increase speed to around 10k rpm. How Do I Use Diashine With Ceramics? The surface to be polished should be properly prepped or smoothed; use of rubber wheels/points or Coarse DiaShine can be used to prep the surface. Lightly load DiaShine onto a bristle brush or felt by slowly (around 5k rpm) rotating the brush/felt in the tub of DiaShine. The friction will ‘melt’ the paste onto the brush. Apply the polish to the restorative surface at a relatively low speed first. Once polish is on the restoration, increase speed to around 10k rpm and slowly move the brush over the surface with moderate pressure on the pull stroke. One brush can polish the entire restoration as it will adapt to the contours. For more information on particular restorative material protocols, access our “Tutorials” Section HERE. How Do I Remove Excess Material After Polishing? All DiaShine polish is completely water soluble. You may use a soft brush or similar tool to remove excess polish. Another option is to spray away the excess. Can I Polish Metals? Yes, all types of metals can be polished to a high lustre, including gold alloys and titanium. However, polishing metals will stain the bristle brush or felt – do not use the same brush on ceramics. What Do You Suggest For Applying The Compound? We recommend using bristle brushes and sometimes felts for applications. To apply the Fine DiaShine, use of a stiff or medium bristle brush is best. For Fine Soft, Medium, Coarse and Super Fine, you may use a soft or medium bristle brush. When polishing most ceramics, the soft, medium or stiff bristle brushes will be sufficient. However on the nano and hybrid materials, we recommend a soft or medium bristle brush so as not to take away any of the restorative surface. Experimentation will allow the user to modify this technique to his/her specific needs.			DIADSIO
		Intensiv Proxoshape Flexible Files Diamond-coated files used with the Intensiv Swingle Oscillating handpiece for the removal of overhangs and finishing of proximal filling surfaces. Perfectly adapted and polished proximal filling surfaces and crown margins are a prerequisite for the maintenance of the health of the periodontium and the prevention of secondary caries. Proxoshape meets the requirements to correctly model the filling surfaces and margins and prepares them for the high gloss finish. • 3 single-sided diamond coated files in 60, 40 and 15 μm • file lengths: 8.5mm and 11mm • minimal metal thickness of file 0.1mm Indications • Finishing, polishing and contouring of proximal restorations surfaces in difficult to access interproximal areas • Removal of excess cement and restoration overhangs Benefits • Easier access to the interproximal space • No iatrogenic damage to adjacent teeth due to one side diamond-coating • Prevention of surface wave generation caused by rotating instruments			INTPSF603
					1BR7
					1CSPHP733
					HP321
					30HP1
		Intensiv Proxoshape Flexible Files Diamond-coated files used with the Intensiv Swingle Oscillating handpiece for the removal of overhangs and finishing of proximal filling surfaces. Perfectly adapted and polished proximal filling surfaces and crown margins are a prerequisite for the maintenance of the health of the periodontium and the prevention of secondary caries. Proxoshape meets the requirements to correctly model the filling surfaces and margins and prepares them for the high gloss finish. • 3 single-sided diamond coated files in 60, 40 and 15 μm • file lengths: 8.5mm and 11mm • minimal metal thickness of file 0.1mm Indications • Finishing, polishing and contouring of proximal restorations surfaces in difficult to access interproximal areas • Removal of excess cement and restoration overhangs Benefits • Easier access to the interproximal space • No iatrogenic damage to adjacent teeth due to one side diamond-coating • Prevention of surface wave generation caused by rotating instruments			INTPSF403
		What Is Diashine? DiaShine Polishing Compound is a premier polishing paste for every dental restorative material (ceramics, composites, provisionals and metals). The combination of our unique carrier (binder) with our specific sized & shaped diamond particles make polishing less wasteful and creates a very quick high lustre finish. DiaShine, comprised of food grade materials, is completely water soluble and versatile using the paste/brush technique allowing the user to easily reach the entire anatomy. Used as recommended, DiaShine does not remove the restorative material therefore keeping the morphology and integrity of the restoration intact. By polishing with DiaShine, a much smoother surface is achieved which may enhance bio-compatibility with gingiva, reduce wear of the opposing dentition and lessen the chance of surface micro fractures. How Do I Get Diashine Onto The Bristle Brush? Part of what makes DiaShine work so well is the unique binder; there is no need to add water or any other substance to the polish. Simply take your bristle brush or felt of choice, run it at a low speed (5k rpm is recommended) and slowly dip the brush into the tub. The friction created will melt the paste onto the brush. When you see the brush changing to the colour of the paste, you have enough. How Does DiaShine Work? Because of the unique composition of the binder/carrier, the compound stays on the rotary applicator and the object being polished. This coupled with the specific size & shape of our diamond powder enables a high gloss finish to be obtained quickly and with minimal effort. What Are The Different Types Of Diashine And What Are They Used For? The Fine grit is the most popular and available in two versions, Fine and Fine Soft. Fine is a very hard compound and is best used with a stiff bristle brush or felt. Fine Soft is a slightly softer version of the Fine and can be used on composites or the newer nano and hybrid ceramics. Medium DiaShine will give you a quick high shine, but not a high lustre – this can also be used to bring a shine back. Coarse is used for obtaining a matte finish or for smoothing (prepping) the surface for final polishing – great for smoothing out occlusal anatomy. Intra Oral is the chairside version of the Fine grit for polishing after adjusting in the mouth. What About The I/O (Intra-Oral) Diashine? Intra Oral is the softest version of DiaShine allowing for easy extrusion from the syringe for polishing chairside. Similar to the laboratory versions, this is also food grade. The Intra Oral has a mild peppermint odour and slightly higher concentration of diamond powder. Intra Oral DiaShine can be used on any type of restorative material such as ceramics, composites, provisionals and metals. How Do I Apply The I/O (Intra-Oral) Diashine? Extrude a small amount of polish directly onto the restoration or rub onto restoration with your finger. Spread the polish over the surface with your brush of choice (See our brushes HERE) at around 5k rpm. After spreading the polish onto the restoration, increase speed to around 10k rpm. How Do I Use Diashine With Ceramics? The surface to be polished should be properly prepped or smoothed; use of rubber wheels/points or Coarse DiaShine can be used to prep the surface. Lightly load DiaShine onto a bristle brush or felt by slowly (around 5k rpm) rotating the brush/felt in the tub of DiaShine. The friction will ‘melt’ the paste onto the brush. Apply the polish to the restorative surface at a relatively low speed first. Once polish is on the restoration, increase speed to around 10k rpm and slowly move the brush over the surface with moderate pressure on the pull stroke. One brush can polish the entire restoration as it will adapt to the contours. For more information on particular restorative material protocols, access our “Tutorials” Section HERE. How Do I Remove Excess Material After Polishing? All DiaShine polish is completely water soluble. You may use a soft brush or similar tool to remove excess polish. Another option is to spray away the excess. Can I Polish Metals? Yes, all types of metals can be polished to a high lustre, including gold alloys and titanium. However, polishing metals will stain the bristle brush or felt – do not use the same brush on ceramics. What Do You Suggest For Applying The Compound? We recommend using bristle brushes and sometimes felts for applications. To apply the Fine DiaShine, use of a stiff or medium bristle brush is best. For Fine Soft, Medium, Coarse and Super Fine, you may use a soft or medium bristle brush. When polishing most ceramics, the soft, medium or stiff bristle brushes will be sufficient. However on the nano and hybrid materials, we recommend a soft or medium bristle brush so as not to take away any of the restorative surface. Experimentation will allow the user to modify this technique to his/her specific needs.			DIADSC3G
					RA430
					1CSPHP732
					RA343
					HP310
					61HP1
		Intensiv Proxoshape Flexible Files Diamond-coated files used with the Intensiv Swingle Oscillating handpiece for the removal of overhangs and finishing of proximal filling surfaces. Perfectly adapted and polished proximal filling surfaces and crown margins are a prerequisite for the maintenance of the health of the periodontium and the prevention of secondary caries. Proxoshape meets the requirements to correctly model the filling surfaces and margins and prepares them for the high gloss finish. • 3 single-sided diamond coated files in 60, 40 and 15 μm • file lengths: 8.5mm and 11mm • minimal metal thickness of file 0.1mm Indications • Finishing, polishing and contouring of proximal restorations surfaces in difficult to access interproximal areas • Removal of excess cement and restoration overhangs Benefits • Easier access to the interproximal space • No iatrogenic damage to adjacent teeth due to one side diamond-coating • Prevention of surface wave generation caused by rotating instruments			INTPSF153
		What Is Diashine? DiaShine Polishing Compound is a premier polishing paste for every dental restorative material (ceramics, composites, provisionals and metals). The combination of our unique carrier (binder) with our specific sized & shaped diamond particles make polishing less wasteful and creates a very quick high lustre finish. DiaShine, comprised of food grade materials, is completely water soluble and versatile using the paste/brush technique allowing the user to easily reach the entire anatomy. Used as recommended, DiaShine does not remove the restorative material therefore keeping the morphology and integrity of the restoration intact. By polishing with DiaShine, a much smoother surface is achieved which may enhance bio-compatibility with gingiva, reduce wear of the opposing dentition and lessen the chance of surface micro fractures. How Do I Get Diashine Onto The Bristle Brush? Part of what makes DiaShine work so well is the unique binder; there is no need to add water or any other substance to the polish. Simply take your bristle brush or felt of choice, run it at a low speed (5k rpm is recommended) and slowly dip the brush into the tub. The friction created will melt the paste onto the brush. When you see the brush changing to the colour of the paste, you have enough. How Does DiaShine Work? Because of the unique composition of the binder/carrier, the compound stays on the rotary applicator and the object being polished. This coupled with the specific size & shape of our diamond powder enables a high gloss finish to be obtained quickly and with minimal effort. What Are The Different Types Of Diashine And What Are They Used For? The Fine grit is the most popular and available in two versions, Fine and Fine Soft. Fine is a very hard compound and is best used with a stiff bristle brush or felt. Fine Soft is a slightly softer version of the Fine and can be used on composites or the newer nano and hybrid ceramics. Medium DiaShine will give you a quick high shine, but not a high lustre – this can also be used to bring a shine back. Coarse is used for obtaining a matte finish or for smoothing (prepping) the surface for final polishing – great for smoothing out occlusal anatomy. Intra Oral is the chairside version of the Fine grit for polishing after adjusting in the mouth. What About The I/O (Intra-Oral) Diashine? Intra Oral is the softest version of DiaShine allowing for easy extrusion from the syringe for polishing chairside. Similar to the laboratory versions, this is also food grade. The Intra Oral has a mild peppermint odour and slightly higher concentration of diamond powder. Intra Oral DiaShine can be used on any type of restorative material such as ceramics, composites, provisionals and metals. How Do I Apply The I/O (Intra-Oral) Diashine? Extrude a small amount of polish directly onto the restoration or rub onto restoration with your finger. Spread the polish over the surface with your brush of choice (See our brushes HERE) at around 5k rpm. After spreading the polish onto the restoration, increase speed to around 10k rpm. How Do I Use Diashine With Ceramics? The surface to be polished should be properly prepped or smoothed; use of rubber wheels/points or Coarse DiaShine can be used to prep the surface. Lightly load DiaShine onto a bristle brush or felt by slowly (around 5k rpm) rotating the brush/felt in the tub of DiaShine. The friction will ‘melt’ the paste onto the brush. Apply the polish to the restorative surface at a relatively low speed first. Once polish is on the restoration, increase speed to around 10k rpm and slowly move the brush over the surface with moderate pressure on the pull stroke. One brush can polish the entire restoration as it will adapt to the contours. For more information on particular restorative material protocols, access our “Tutorials” Section HERE. How Do I Remove Excess Material After Polishing? All DiaShine polish is completely water soluble. You may use a soft brush or similar tool to remove excess polish. Another option is to spray away the excess. Can I Polish Metals? Yes, all types of metals can be polished to a high lustre, including gold alloys and titanium. However, polishing metals will stain the bristle brush or felt – do not use the same brush on ceramics. What Do You Suggest For Applying The Compound? We recommend using bristle brushes and sometimes felts for applications. To apply the Fine DiaShine, use of a stiff or medium bristle brush is best. For Fine Soft, Medium, Coarse and Super Fine, you may use a soft or medium bristle brush. When polishing most ceramics, the soft, medium or stiff bristle brushes will be sufficient. However on the nano and hybrid materials, we recommend a soft or medium bristle brush so as not to take away any of the restorative surface. Experimentation will allow the user to modify this technique to his/her specific needs.			DIADSF3G
					1CSPHP731
					RA342
					76RA1
					HP115
		Intensiv Swingle, W&H Synea, Without Light The contra-angle Intensiv Swingle combines both functions: Free axial rotating of the strip, being applied during finishing and polishing of prepared surfaces. Fixed axial position (12 positions at each 30 degrees within 360 degrees) for exact positioning of the strip, being applied in the resolution of the contact point and for enamel reduction. Moreover, the small sized contra-angle head allows a significantly improved view of the operating field. Contra-angle with integrated water spray and optional light Stroke 0.9mm 20 000 oscillating movements with 40 000 rpm With toggle switch to choose free rotating or fixed position of strips 12 different axial fixed positions on 360 degrees. File ejector and cleaning needle (water spray canals) are included in delivery			INTWG69A
		Optrafine HP Polishing Paste Highly efficient diamond polishing system, especially designed to meet the high esthetic requirements of ceramic polishing. Polishing instruments with a a high content of diamond particles. Shapes: Flame Cup Disc Nylon brushes and diamond polishing paste for high-gloss polishing Indication: High-gloss polishing of dental ceramic restorations Advantages: Especially designed for ceramic materials Particularly smooth restoration surfaces High wear resistance Autoclavable and reusable			602289
		What Is Diashine? DiaShine Polishing Compound is a premier polishing paste for every dental restorative material (ceramics, composites, provisionals and metals). The combination of our unique carrier (binder) with our specific sized & shaped diamond particles make polishing less wasteful and creates a very quick high lustre finish. DiaShine, comprised of food grade materials, is completely water soluble and versatile using the paste/brush technique allowing the user to easily reach the entire anatomy. Used as recommended, DiaShine does not remove the restorative material therefore keeping the morphology and integrity of the restoration intact. By polishing with DiaShine, a much smoother surface is achieved which may enhance bio-compatibility with gingiva, reduce wear of the opposing dentition and lessen the chance of surface micro fractures. How Do I Get Diashine Onto The Bristle Brush? Part of what makes DiaShine work so well is the unique binder; there is no need to add water or any other substance to the polish. Simply take your bristle brush or felt of choice, run it at a low speed (5k rpm is recommended) and slowly dip the brush into the tub. The friction created will melt the paste onto the brush. When you see the brush changing to the colour of the paste, you have enough. How Does DiaShine Work? Because of the unique composition of the binder/carrier, the compound stays on the rotary applicator and the object being polished. This coupled with the specific size & shape of our diamond powder enables a high gloss finish to be obtained quickly and with minimal effort. What Are The Different Types Of Diashine And What Are They Used For? The Fine grit is the most popular and available in two versions, Fine and Fine Soft. Fine is a very hard compound and is best used with a stiff bristle brush or felt. Fine Soft is a slightly softer version of the Fine and can be used on composites or the newer nano and hybrid ceramics. Medium DiaShine will give you a quick high shine, but not a high lustre – this can also be used to bring a shine back. Coarse is used for obtaining a matte finish or for smoothing (prepping) the surface for final polishing – great for smoothing out occlusal anatomy. Intra Oral is the chairside version of the Fine grit for polishing after adjusting in the mouth. What About The I/O (Intra-Oral) Diashine? Intra Oral is the softest version of DiaShine allowing for easy extrusion from the syringe for polishing chairside. Similar to the laboratory versions, this is also food grade. The Intra Oral has a mild peppermint odour and slightly higher concentration of diamond powder. Intra Oral DiaShine can be used on any type of restorative material such as ceramics, composites, provisionals and metals. How Do I Apply The I/O (Intra-Oral) Diashine? Extrude a small amount of polish directly onto the restoration or rub onto restoration with your finger. Spread the polish over the surface with your brush of choice (See our brushes HERE) at around 5k rpm. After spreading the polish onto the restoration, increase speed to around 10k rpm. How Do I Use Diashine With Ceramics? The surface to be polished should be properly prepped or smoothed; use of rubber wheels/points or Coarse DiaShine can be used to prep the surface. Lightly load DiaShine onto a bristle brush or felt by slowly (around 5k rpm) rotating the brush/felt in the tub of DiaShine. The friction will ‘melt’ the paste onto the brush. Apply the polish to the restorative surface at a relatively low speed first. Once polish is on the restoration, increase speed to around 10k rpm and slowly move the brush over the surface with moderate pressure on the pull stroke. One brush can polish the entire restoration as it will adapt to the contours. For more information on particular restorative material protocols, access our “Tutorials” Section HERE. How Do I Remove Excess Material After Polishing? All DiaShine polish is completely water soluble. You may use a soft brush or similar tool to remove excess polish. Another option is to spray away the excess. Can I Polish Metals? Yes, all types of metals can be polished to a high lustre, including gold alloys and titanium. However, polishing metals will stain the bristle brush or felt – do not use the same brush on ceramics. What Do You Suggest For Applying The Compound? We recommend using bristle brushes and sometimes felts for applications. To apply the Fine DiaShine, use of a stiff or medium bristle brush is best. For Fine Soft, Medium, Coarse and Super Fine, you may use a soft or medium bristle brush. When polishing most ceramics, the soft, medium or stiff bristle brushes will be sufficient. However on the nano and hybrid materials, we recommend a soft or medium bristle brush so as not to take away any of the restorative surface. Experimentation will allow the user to modify this technique to his/her specific needs.			DIADSFS3G
					S443
					HP360